DIN 21CrMoV5-7/1.7709 Engineering steel
Port: Hu nan
21CrMoV5-7 engineering steel, 21CrMoV5-7 alloy tool steel, 21CrMoV5-7 alloy steel, 21CrMoV5-7 alloy structural steel, 1.7709 engineering steel
Alloy Structural Steel, Alloy Tool Steel, Carbon Structural Steel, Carbon Tool Steel, Bearing Steel, Spring Steel ,Stainless Steel, Refractory Steel, Roll Steel, Pinion Steel. Additionally, the company also has the capacity to forge round steel, steel flat, square steel, module, shaft and roller
1: 21CrMoV5-7 steel introduction
21CrMoV5-7 Steel is a high quality High Temperature Alloy Structural steel, which belongs to the alloy steel for fasteners with high or low temperature performance. It has high strength and good performance after heat treatment, and is generally used in quenched and tempered state. 21CrMoV5-7 steel,also refers to DIN 1.7709, is defined as pearlitic heat-resistant steel with high content Cr and Mo as per EN 10269 Standard.
2: 21CrMoV5-7 steel equivalent
| Country | China | Japan | Germany | USA |
| Standard | GB/T | JIS |
DIN (W-Nr.) DIN EN 10269 |
AISI/ASTM |
| Grade |
|
|
21CrMoV5-7 |
|
3: 21CrMoV5-7 steel chemical composition
| Grade | C | Si | Mn | P | S | Cr | Mo | Ni | V |
| 21CrMoV5-7 | 0.17-0.25 | 0.40 | 0.40-0.80 | 0.025 |
0.03 |
1.20-1.50 |
0.55-0.80 | 0.60 | 0.20-0.35 |
4: 21CrMoV5-7 steel mechanical properties
The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
5: 21CrMoV5-7 steel overviews
| Size | Round | Dia 6-1200mm |
| Plate/Flat/Block |
Thickness 6mm-500mm |
|
|
Width 20mm-1000mm |
||
| Heat treatment | Normalized ; Annealed ; Quenched ; Tempered | |
| Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled | |
| Delivery condition | Forged; Hot rolled; Cold drawn | |
| Test | Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. | |
| Payment terms | T/T;L/C;/Money gram/ Paypal | |
| Trade terms | FOB; CIF; C&F; etc.. | |
| Delivery time | 30-45 days | |
| Application | 21CrMoV5-7 is used for engineering structural, like high tensile shafts, bolts and nuts, gears, pinions and spindles. Locomotive traction with the big gear, supercharger drive gear, pressure vessel, rear axle, gear load of connecting rod and a spring clip,21CrMoV5-7 steel can also be used to under 2000 m deep well of oil drill pipe joint and the fishing tool, and can be used for bending machine mould, etc. | |
6: Heat Treatment
Heat treatment temperatures, rate of heating, cooling and soaking times will vary due to factors such as the shape and size of each component. Other considerations during the heat treatment process include the type of furnace, the quenching medium and work piece transfer facilities. Please consult a heat treatment specialist for full guidance on heat treatment.
7: Delivery condition
For hot forged bar, usually the delivery condition is hot forged, annealed/QT, rough turned/Black surface.
For hot rolled bar, usually the delivery condition is hot rolled, annealed/QT, Black surface.
For hot forged block, usually the delivery condition is hot forged, annealed/QT, milled surface/Black surface
For hot rolled plate, usually the delivery condition is hot rolled, annealed/QT, black surface.
For cold drawn bar, usually the delivery condition is cold drawn, annealed/QT, peeled/black surface
