DIN 16MnCrS5/1.7139 Engineering steel
Port: Hu nan
16MnCrS5 engineering steel, 16MnCrS5 alloy tool steel, 16MnCrS5 alloy steel, 16MnCrS5 alloy structural steel, 1.7139 engineering steel
Alloy Structural Steel, Alloy Tool Steel, Carbon Structural Steel, Carbon Tool Steel, Bearing Steel, Spring Steel ,Stainless Steel, Refractory Steel, Roll Steel, Pinion Steel. Additionally, the company also has the capacity to forge round steel, steel flat, square steel, module, shaft and roller
1: 16MnCrS5 steel introduction
16MnCrS5 has good hardenability and machinability, larger section, higher surface hardness and wear resistance after heat treatment, and higher impact toughness at low temperature.
2: 16MnCrS5 steel equivalent
| Country | China | Japan | Germany | USA |
| Standard | GB/T | JIS |
DIN (W-Nr.) DIN 17210 |
AISI/ASTM |
| Grade |
|
|
16MnCrS5 |
|
3: 16MnCrS5 steel chemical composition
| Grade | C | Si | Mn | P | S | Cr |
| 16MnCrS5 | 0.14-0.19 | 0.40 |
1.00-1.30 |
0.035 |
0.02-0.035 |
0.80-1.10 |
4: 16MnCrS5 steel mechanical properties
The mechanical properties mainly include tensile strength, yield strength, elongation, area or reduction, hardness, impact value, non-metalic inclusion etc. Different heat treatment, the mechanical properties will be different, such as normalized, tempered, QT. If you want to know the properties, kindly contact the salesman.
5: 16MnCrS5 steel overviews
| Size | Round | Dia 6-1200mm |
| Plate/Flat/Block |
Thickness 6mm-500mm |
|
|
Width 20mm-1000mm |
||
| Heat treatment | Normalized ; Annealed ; Quenched ; Tempered | |
| Surface condition | Black; Peeled; Polished; Machined; Grinded; Turned; Milled | |
| Delivery condition | Forged; Hot rolled; Cold drawn | |
| Test | Tensile strength, Yield strength, elongation, area of reduction, impact value, hardness, grain size, ultrasonic test, US inspection, magnetic particle testing, etc. | |
| Payment terms | T/T;L/C;/Money gram/ Paypal | |
| Trade terms | FOB; CIF; C&F; etc.. | |
| Delivery time | 30-45 days | |
| Application | 16MnCrS5 steel is used by carburizing and quenching. It is mainly used to manufacture sealing parts of gear, worm, shaft sleeve and so on. | |
6: Delivery condition
For hot forged bar, usually the delivery condition is hot forged, annealed/QT, rough turned/Black surface.
For hot rolled bar, usually the delivery condition is hot rolled, annealed/QT, Black surface.
For hot forged block, usually the delivery condition is hot forged, annealed/QT, milled surface/Black surface
For hot rolled plate, usually the delivery condition is hot rolled, annealed/QT, black surface.
For cold drawn bar, usually the delivery condition is cold drawn, annealed/QT, peeled/black surface
